FAQ

We decided to out up this section as we started building our cabinet and encountered issues. If we scratched our head about something, it will be here.

[su_spoiler title=”Can’t launch a Visual Pinball table” open=”no” style=”default” icon=”plus” anchor=”” class=””]If the table can’t be launched there can be many reasons. check to following tricks.
-1 the rom file is corrupted delete and re-download
2- the Visual Pinball.exe is not set to run as administrator[/su_spoiler]

[su_spoiler title=”How many power supply should i get?” open=”no” style=”default” icon=”plus” anchor=”” class=””]It depends on how many toys you have. You will have to calculate the power and amps iof each toys you have and add it up. We use a 380W 30 amps 24v and a 350W 20 amps 12v [/su_spoiler]

[su_spoiler title=”How do i connect a Ledwiz” open=”no” style=”default” icon=”plus” anchor=”” class=””]Visit our Ledwiz section for detail information. The Ground from your power supply will connect to the GND on the ledwiz. Port 1-32 will connect to your toys ground cable and the positive wire of your toy will be powered by the positive wire of your power supply.[/su_spoiler]

[su_spoiler title=”Visual Pinball Table automatically closes when starting” open=”no” style=”default” icon=”plus” anchor=”” class=””]The most common reason for this is when the option “force full screen is enable, turn it off” we’ve also experienced a conflict with the digital plunger and future pinball and visual pinball. Unplugging the plunger and re configuring it helped fix the issue. /su_spoiler]

[su_spoiler title=”Spoiler title” open=”no” style=”default” icon=”plus” anchor=”” class=””]Hidden content[/su_spoiler]

[su_spoiler title=”Spoiler title” open=”no” style=”default” icon=”plus” anchor=”” class=””]Hidden content[/su_spoiler]

[su_spoiler title=”Spoiler title” open=”no” style=”default” icon=”plus” anchor=”” class=””]Hidden content[/su_spoiler]