Quatro and 5 Ledbar board goes open source

UPDATE/IMPROVE BUT DO NOT RE-SELL

I have decided to make the Quatro board and the 5 led flash bar open source. That way the board can be improved by anyone and everyone can benefit from it.

QUTRO: This board was designed to make it easier to connect all your power supply and grounds to 1 board. See the link for specs details: https://mameinabox.com/quatro/

Quatro board

You can Download the ZIP file for this board HERE

The Zip file will include the DXF and the Gerber file. The Gerber file you can just upload to a board manufacturer of your choice. I used https://jlcpcb.com/ . The Zip file also contains the source code to modify the board. The file is named Quatro.dxf I used https://easyeda.com/ to edit the boards.

Parts


5 Led Flash bar


You will find the board description and setup https://mameinabox.com/5ledbar/

I created the 5 led Flash board to make it easier for people with little soldering experience to connect the 5 led flash bar to a LEDWIZ.

The Zip file will include the DXF and the Gerber file. The Gerber file you can just upload to a board manufacturer of your choice. I used https://jlcpcb.com/ . The Zip file also contains the source code to modify the board. The file is named 5LEDBAR v2.dxf I used https://easyeda.com/ to edit the boards.

You can download the board HERE

Parts